Microplate Sealing Films and Tapes
Thomas Scientific Gas Permeable Clear Heat Seal; clear heat sealing film, with 3 mm slits for gas transfer, 1 roll (450 m x 78 mm)
Peelable heat sealing film, optically clear; suitable for qPCR and optical applications Heat sealing offers a 100% effective method for plate sealing for a complete seal integrity, as well as being quick and cost effective. Our Clear Heat Seal is an optically clear laminate film forming a peelable seal to polypropylene, polyethylene, polystyrene, polycarbonate and cyclic olefin copolymer (COC) plates. Samples can also be accessed by pre-piercing with a blade, needle or our Pierce Plate (4ti-0398). The optical clarity of this seal enables its use for sealing plates required for imaging use, including fluorescent detection methods such as qPCR and colorimetric assays. The Clear Heat Seal forms a complete seal to a plate enabling both low temperature uses, including low temperature storage, and high temperature uses, such as PCR (when used with a pressurised heated lid). This seal demonstrates moderate solvent resistance and can be utilised for short term compound storage at room temperat
Andwin Scientific ALUMINUM FOILS FOR PCR AND COL
The sterile Aluminum Foils for PCR and Cold Storage gives a safe and dependable sealing area for all PCR plates. The foil is 38 m thick and is free of RNase, DNase, and nuclease. It is soft and non-permeable but is equipped with durable, medical-gra
Thomas Scientific PCR Seal 96/8, clear adhesive film, vertically perforated, strong adhesive, 115 x 100 mm, 100/pk
Our PCR Seal is a durable transparent polyester film with a strong adhesive layer. The seal enables a high integrity and efficiently prevents sample evaporation. It is recommended for PCR, qPCR, and other optical applications (e.g. fluorescence or colorimetric measurements) as well as sample storage.
Thomas Scientific AlumaSeal II Sealing Film, Non-Sterile
A 36 µm soft non-permeable aluminum foil sealing film with 28 µm layer of strong medical-grade acrylic adhesive, AlumasSeal IIsealing films eliminate the need for heat-sealing devices or mats during thermal cycling. Each sealing film measures 82.6 x 146.1 mm and offers sufficient sealing area for all PCR plates. Length between the perforations with end tabs removed is 125.4 mm. Compared to other aluminum foils, AlumaSeal II has less tendency to roll back or itself when removing the backing paper and conforms well to the plate during application. Easily pierceable with single or multichannel pipettors and robotic probes Heat & cold resistant, recommended for temperatures from -80°C to +120°C Certified DNase-, RNase-, and nucleic-acid-free Excellent barrier properties, virtually no sample evaporation or drying Excel Scientific Sealing Film Selection Chart
Andwin Scientific Titer Tops 100/pk
Multipurpose pre-cut adhesive polyethylene film. Durable and thick (4.4mil) yet easily pierced with a pipet tip, Polyethylene film that provides excellent adhesion to plastic microplates, Non-cytotoxic, sterile, solvent resistant and waterproof, Chemically resistant and thermally stable, UV transparent down to 25nm.
Andwin Scientific AERASEAL STERILE 50/PKAERASE
The AeraSeal sealing films are ideal for tissue culture plates, bio-blocks, and 96-well plates where the exchange of gas is needed for cell or bacterial growth. This product is 140 m thick and can be pierced with no difficulty using pipet tips or pipets for sample recovery. It can be used in temperatures ranging from -20C to 80C. The film is classified as non-cytotoxic and highly gas permeable. This product is sold in a pack of 50.
Sigma Aldrich Fine Chemicals Biosciences Breathe Easier sealing mem
Gas-Permeable Sealing Membrane - A fresh Breath for Cell Growth TechnologyBreathe-Easier sealing membrane offers an exceedingly high rate of gas exchange to allow maximum cell growth rate. When adhered to a microtiter plate the 5.5 mil thick membrane insures a uniform rate of gas exchange for all wells while sustaining a contaminant-free environment within the well. Conventional microtiter lids disrupt uniform gas exchange from well to well by favoring those wells along the perimeter of the plate. With Breathe-Easier sterility is achieved using gamma irradiation. Unlike ethylene oxide sterilization this sterilization method assures that no cytotoxins are introduced into the membranes. Breathe Easier will not inhibit fibroblast cell growth or division and the membrane is fDA approved for blood and cell contact in wond healing. The acrylic adhesive exhibits excellent bonding characteristics with all different plastic microtiter plates. High Gas Permeability- Rapid and uniform t
Thomas Scientific Pierce Heat Seal; pierceable heat sealing foil, 100 sheets (125 x 78 mm)
Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Pierce Heat Seal is compatible with polypropylene and polystyrene plates. This seal demonstrates good solvent resistance and can be used for low temperature and room temperature compound storage in DMSO and organic solvents.
Andwin Scientific MICROPLATE ADHESIVE FILM -40C
The microplate film offer reduced evaporation, spillage, and contamination between wells. This product also features a secure seal, which removes "edge effects" in sensitive ELISA assays. The films can also seal tissue-culture plates for short-term storage, incubation, and containment of biohazards. These can work in a temperature range from -40C to 120C. Nonsterile and non-pierceable.
Essendant PAPERCLEAR FILM 36X75
To ensure the quality of your output from start to finish rely on HP printing material for Designjet printers HP papers are engineered to work with HP Designjet print cartridges ink systems and HP Designjet printers to deliver sharper print quality and colors that stay true and vivid The result-a total printing solution designed to fit your needs Sheet/Roll Size- 36x75 ft Paper/Media Thickness (mil)- 5 mil Paper/Media Color(s)- Clear Color Family- Clear
Andwin Scientific EZ-Pierce Sealing Films, Sterile
Easily pierceable, 70 µm thick, polyethylene with acrylic adhesive, EZ-Pierce sealing films allow direct sample recovery with single or multichannel pipettors and robotic probes. Dimensions are 82.6 x 142.9 mm for 96-well plates.
Dot Scientific ALUMINUM PLATE SEALERS 100/PK
This item has a minimum order quantity of 2 per supplier requirements. ALUMINUM PLATE SEALERS 100/PK